Every pepper needs to have some kind of self-defense weapon laying around to keep unwanted guests out of your home. But if you’re not comfortable with using a knife or just want to use something a little more special you could opt to go for a homemade stun gun. A stun gun is an electric weapon that is used to immobilize an assailant within arms reach. The stun gun gives a shock to the attacker which temporarily disables him from doing anything because of the pain from the shock. Leaving you free to deal with the unwanted guest.
Should you not know how to make a stun gun yourself than you’re in luck. Below you’ll find an easy to follow tutorial so you can start making your own stun gun.
If you love these kinds of DIY weapons, check out our other post here. 9 awesome DIY weapons to add to your arsenal
Let’s Get Started!
What You Will Need:
What You Will Need | How To Make A Homemade Stun Gun | Homesteading Survival Skills
- High-voltage converter
- 20 cm PVC pipe
- Safety switch and a momentary switch (main button)
- 3 As battery and battery housing
- PVC coupling and soda bottle cap
- 2 small brass nails
- Black matte spray paint
- Cutter and pliers
- Glue gun
Step 1. Prepare Materials
Prepare Materials | How To Make A Homemade Stun Gun | Homesteading Survival Skills
As a homesteader who creates, builds, repurposes, and recycles, you may already have the materials to make a homemade stun gun at home or in your tool shed. For the inverter, a high voltage one, specifically one which can produce up to 400, 000 volts is recommended. Take out the outer layer of the inverter for the circuitry part to fit in. Using a cutter and pliers, carefully peel off the outer layer of the converter. Once the outer layer is gone, the inverter will easily fit in the PVC pipe.
Step 2. Assemble The Circuitry
Assemble The Circuitry | How To Make A Homemade Stun Gun | Homesteading Survival Skills
Prepare 3 triple A batteries and battery housing which will fit in the PVC pipe. The Taser should also have a safety switch with a push button that lights up when pressed so you can easily see if the Taser is on or off. You will also use a small momentary switch as the main button. Check out this basic circuit diagram or electronic schematic to assemble the basic circuitry.
Stun Gun Circuit Diagram
Stun Gun Circuit Diagram | How To Make A Homemade Stun Gun | Homesteading Survival Skills
This elementary electronic schematic shows how you will assemble the circuits to make the Taser work. The battery is connected to the on and off safety switch which is the red LED button. It is then connected to the momentary switch that we press to make the Taser spark. This leads to the high voltage converter connected to the spark gap where the spark zaps through or between the two prongs which lead back to the battery.
Step 3. Prepare Stun Gun Housing
Prepare Stun Gun Housing | How To Make A Homemade Stun Gun | Homesteading Survival Skills
Now we go to our PVC pipe. Spray paint the pipe with a black matte spray paint and leave it to dry. Cut the pipe in two so you can have access to the batteries when replacing them after they’ve run out. Measure 13 cm from one end of the PVC pipe and cut from there so you have another 7 cm PVC pipe. Drill a hole for the main switch some 4 cm from the top of the longer PVC pipe where the momentary switch will be inserted. Use a PVC coupling to join the two separate PVC pipe pieces securely and for replacing the batteries.
Step 4. Assemble Stun Gun
Assemble Stun Gun | How To Make A Homemade Stun Gun | Homesteading Survival Skills.
Step 5. Finished Homemade Stun Gun
Finished Homemade Stun Gun | How To Make A Homemade Stun Gun | Homesteading Survival Skills
Finally, you can test your finished homemade stun gun! Make sure to take safety precautions and use this weapon for self-defense responsibly. Also, make sure to keep it out of reach of your youngsters.
Check out the full story here homesteading.com
Also Read: 10 Survival Gear Essentials You Can’t Go Without
Leave a Reply